Huma Regulator Edgun Matador R3 / R3M / Lelya 2.1

Huma-Air Tuning Regulator For The Edgun Matador R3M

For the Edgun Matador R3 and R3M we have designed a replacement Huma Tuning Regulator complete with a XL volume plenum.
Due to our ultra compact build of our regulator you can remove the large factory regulator body and replace it with our regulator and volume plenum.
The extra regulated volume what is created allows you to achieve the same pellet velocity with a lower regulator setpoint; so smoother shooting behavior and more shots available.

Our regulator + plenum replaces the original regulator and is an “one on one” replacement
Just unscrew the factory regulator and regulator body and replaces it with the Huma regulator set and you are finished.
(This model will fit until early 2017 models. Please check if your reg matches the picture here above)

(If you are looking for an extra power tune also, please check our Edgun Matador Power Tune Set what also includes an extra brass hammerweight)

The benefits of the Huma-Air, Edgun Matador R3M Tuning Regulator are:

Easy to adjust due to the pressure scale, so you can do all the fine tuning yourself.
Achieve the same pellet velocity with less regulator pressure.
This regulator has a wide pressure range to cover all calibers.
The ultra compact build will give you more regulated volume.
Excellent consistency.
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.

It is pre-set on most common setting, and it has a clear pressure scale so you can easy adjust it to your wishes.
These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.

We will put in a breech sticker “Huma regulated” what you can put on your rifle.