Description
The Mora stands out from earlier models and competitors in many ways. It features a sturdy, chunky, industrial-looking design. Built for serious power. But at the same time, it has a velvety-smooth side... It shoots exceptionally well even at low pressure with pellets. Velocities are incredibly consistent. Deviations of 1 meter per second are quite common. That’s because it offers extremely precise tuning capabilities.
You can fine-tune the regulator starting at around 60 bar. Next, you can fine-tune the hammer spring tension, and to top it all off, you can adjust the dwell time using the star knob that directly controls the valve. This gives you a vast range of possibilities. Oh, and one more thing: Important: You can also adjust the depth of the probe. After all, the projectile needs to slide smoothly against or into the rifling. Especially with pellets, the probe needs to be set a bit deeper due to the depth of the jacket. Slugs don’t have this issue, as they often have a flat bottom.
The fact that they continue to push the boundaries of innovation is evident from the fact that they now offer an oversized Valvestem that’s very easy to replace. With earlier RTI models, the entire rifle had to be taken apart—a very time-consuming task. With the Mora: just unscrew the nut, remove it, and replace it. Done in five minutes!
Is this a rifle for everyone? Definitely not—tastes vary, of course. Is it a rifle for precision shooters? Absolutely!! For exact specifications, always check the RTI Arms Slovenia website.
Oh, and by the way: a THREE-year warranty!!
We haven't been able to get all the details organized properly. Scope, mounts, and bipod are not included in the price!
The Mora Standard comes with a 600mm/24" barrel, a 700cc carbon fiber bottle, two magazines, a Hušh 50 carbon silencer, an M-Lok bottle shield, and a heavy-duty hard case.
The Mora features an integrated silencer (in markets where it is permitted) as part of its monocore design. It also comes with an additional silencer included, for those who want to be extra quiet.
We designed the Mora with precision in mind. The barrel can either be truly free-floating or locked in place below the scope area.
Mora features a smart design where each hole corresponds to a specific O-ring in the rifle. If there is a leak, you can identify exactly which O-ring is leaking from the outside.
The valve on the Mora is designed so that it can be easily removed without disassembling any other parts of the rifle. You can easily remove the entire valve assembly.
Interchangeable Calibers
Calibers can be easily and quickly swapped out.
Ambidextrous Magazine
The smart design of a magazine allows it to be flipped over so that it can be read by both left- and right-handed people.
Suppressor-ready & included
The Mora is suppressor-ready and also comes with the Hušh 50 Carbon Suppressor included.
Adjustable Trigger
The first and second stages of the trigger can be easily adjusted down to 200g.
Heavy-Duty Case
Mora comes with an industrial-grade, heavy-duty hard case featuring a foam insert with plenty of room for accessories.
caliber
mm
4.5 5.5 6.35 7.62 9.
Energy*
Joules
Standard 700ccm
60cm/24" barrel
The rifle is also available in 7J, 16J, 20J, or 24J 37–70 60–122 80–175 110–200 /
Energy*
Joules
The Rifle is also available in 7J, 16J, 20J, or 24J / / / / 130 - 305
Regulated pressure*
Bar
PSI
100 - 200 bar
1450 - 2900 PSI
Shots per fill*
Standard 700cc
60cm/24" barrel
/-60/-45/-35/-30/-/
Shots per fill*
70 cm/28" barrel
/ / / / / - 30
Max filling pressure 300 bar (4350 PSI)
Plenum Volume 125 cc
Bottle Carbon fiber or aluminum bottle
Magazine capacity 23 19 15 13 9
Max pellet length in magazine
which still fits in the magazine (all calibers) 22 mm
Max pellet length single shot
which can fit into the barrel without the magazine (all calibers) 25 mm
Trigger 2-stage, adjustable down to 200 g
Cocking system Side lever
Grip Standard AR15 grip
Barrel
Compact (50 cm/20")
LW 1:17.7", choked RPB 1:16", light choke RPB 1:20", light choke LW 1:16", choked/
Barrel
Compact (60cm/24")
LW 1:17.7", choked RPB 1:16", light choke RPB 1:20", light choke LW 1:16", choked/
Barrel
/RPB 1:16", light choke RPB 1:20", light choke/LW 1:16", without choked
Caliber Kits Different caliber kits can be purchased as an add-on so you can easily change your rifle’s caliber
Safety Yes – Locks hammer in place
Optics Picatinny rail, adjustable, 20–150 MOA
Picatinny rail length 190 mm (18 slots)
Pressure gauge Two pressure gauges. The first gauge shows the pressure in the tank, the second gauge shows the plenum/regulated pressure.
Total length
Compact
Standard
Sniper
785 mm (30.9")
885 mm (34.8")
985 mm (38.8")
Height
From bottom of the grip to Picatinny rail
195 mm
Width40 mm
Bottle diameter
Standard700cc
60 mm (2.36")
60 mm (2.36")
83 mm (3.26")
Weight
Standard 4.4 kg
Sniper 4.6 kg
Charging type Foster coupling