Description
High-quality Dropp In regulator from HUMA. Reuse your swivel section, set the HUMA regulator to your desired pressure, and... you’re all set. Adjustment range: 110 to 190 bar. Advantages: Smooth and easy to adjust, with a slightly wider regulated range. This means you can achieve the same speeds at a slightly lower pressure, or higher speeds at the same pressure. When properly adjusted, the consistency is shockingly precise!! Made in Holland, so superior. Note: First measure the outside diameter of the thread on your current regulator. This X-version is for the larger diameter; the thread diameter must be approximately 19 mm on the outside of the thread!
This unique Huma-Air regulator for the RAW HM1000 is specially designed as a “one-to-one” replacement regulator for RAW rifles and instantly solves all your original regulator problems!
The regulator is highly consistent across the entire pressure range of the buddy tank and can be screwed into the action in under a minute. Our ultra-compact design adds a few extra CCs of regulated volume to your speargun.
Made of solid stainless steel and vented to atmosphere. Your speargun must be equipped with the V-shaped fill port and pressure gauge connector.
There are two types of regulators used in the Raw models: the “HM” and the “HMX”.
The HM-model regulator has an external thread diameter of 16.6–16.7 mm, and its serial number includes “HM”.
The HMX-model regulator has an external thread diameter of approximately 19 mm, and its serial number includes an “X”.
The benefits of the Huma-Air tuning regulator for the RAW HM1000:
1. Improved rifle accuracy by eliminating fluctuations in muzzle velocity.
2. Consistent muzzle velocity across the entire operating pressure range.
3. It immediately gives you better shooting results and a completely flat trajectory.
4. The compact design gives you some extra regulated volume.
5. Easily adjustable pressure setting.